When you are facing the problem of broken garage door springs that need to be replaced you can either call professional garage door experts or try to handle it on your own. These springs are long and heavy coils that are used to live and lower the garage door. If you have a broken garage door spring that needs to be taken care of, you need to conduct detailed research to hire a garage door expert that can handle the job. You might be thinking about which the best garage door spring repair near me is. This article will help you to find out the right source for your garage door.
The most important point to keep in mind is that turn off the power supply of the garage door so you do not get electrocuted during the project. Unplug the power cord of the garage door opener to disconnect the power supply from the garage door. For the newer model, you may need to remove the fuse or turn off the circuit breaker to stop the power supply.
Look closely at the broken and new garage door springs to make sure that they are same in the type, size, and dimension. While picking up a new spring, avoid grabbing them. Don’t touch the winding cones on the new springs. Use a marker or any other writing instrument to mark the torsion shaft end of the springs. It is important because it helps you to make sure that you have a garage door that is balanced correctly once you have completed the job.
Wind the unbroken spring off to complete the further task and unfasten the screws holding the cones and mounting brackets together and then remove the bolts completely. Once you have finished the task of removing the broken spring, it is time to install a new spring along with re-installing the hardware. Once you have finished the job, you need to check the balance of the garage door. To reduce the friction of the garage door, you may apply any high-quality lubricant.
Once you make sure that the garage door is aligned correctly and all the components are tightened securely, it is time to reconnect the garage door opener and turn on the fuse. It is strongly suggested that don’t play with a garage door and garage door opener but you need to open and close the garage door a few times to test its performance of the garage door. Honestly speaking garage door spring replacement job is not ideal for an ordinary person. If you want to handle it on your own, you need to make sure that you are doing it carefully because it can be a dangerous job if you are not an experienced person. You could lose your hands, fingers, or even life. It is suggested to leave it to the professionals.